Hybrid Foil Adhesive is a water-base printing adhesive where used to achieve an elastic, soft touching and foil covering effect in textile printing.
Technical Details :
Appearance : Paste
Odor : Characteristic
Color : Transparent
Viscosity : [(77 °F) sp: 7, rpm: 20 Brookfıeld ] : 50.000 – 70.000 [mPa.s]
Density : 1,02 g/cm³ (77 °F) pH : 7.5 – 8.5
Boiling Point : >212°F
Solubility : Soluble with water
(Standards: for fastness - ISO 105-X10: 1993 / ISO 105-D01:2010 / ISO 105-B02:2013)
Hybrid Foil Adhesive is manufactured for foil printing.
Never use water to reduce the viscosity. Before use, please stir well. Do not
use any additives that are not advised. After using, the silk-screen should be cleaned with water.
Hybrid Foil Adhesive is provide to adhesion foil to fabric that it increases wash strenght of fabric
It is advised to try on suitable conditions. 50 – 62 Shore, U type dr. blade should be used.
It should be fixed at 320°F; 20 seconds, 4 bar pressure.
SAFETY and STORAGE
It does not contain harmful substances for inhalation and skin when used. However in case of contact to sensitive organs, such as eyes or mouth wash with plenty of water. If necessary, medical assistance is advised.
Keep containers dry and tightly closed. Store in a ventilated place between (+5)-(+30) °C of temperature. It should be consumed within 12 months after the production date.
There are yet no reviews for this product.
There are not yet technical information for this product.