It is a water based printing base used to achieve a bright, elastic and soft touching foil effect in textile printing. Our product is the best foil adhesive for fabric, Easy using during the print. If cured correctly as advised, the washing fastness is high. Washing test should be applied 24 hours after curing. Suitable to ecological standards.
PHYSICAL CHEMICAL PROPERTIES
Appearance : Transparent paste
pH : 6,5-7 (25 °C)
Density : 1,33 g/cm³ (25 °C)
Viscosity : [(25 °C) sp: 7, rpm: 20 Brookfield ] : 60.000 – 80.000 [mPa.s
Printing : After printing HB Foil Adhesive on the fabric, It should be cured as advised. After curing, the foil is pressed on the print to have a transfoil effect .
Screen : Silk screens that are made of 34 mesh 80 micron silk - 43 mesh 70 micron silk should be used.
Squeegee : 50 – 62 Shore U type squeegee should be used.
Mixture : To reduce the viscosity, HB Regulator can be added (1-3 %) into HB Foil Adhesive. Never use water to reduce the viscosity. Before use, please stir the ink well. Do not use any additives that are not advised. After using, the screen should be cleaned with the water.
Curing : Should be cured at 160 °C for 1,5 – 2 minutes.
Press : It should be applied at 160 - 170 °C temperature, at 4 - 6 bars pressure, in 10 - 15 seconds for hand press. It should be applied at 160 - 170 °C temperature, at 4 - 6 bars pressure, in 20 - 25 seconds for continuous press.
SAFETY and STORAGE
It does not contain harmful substances for inhalation and skin when used. However in case of contact to sensitive organs, such as eyes or mouth wash with plenty of water. If necessary, medical assistance is advised.
Keep containers dry and tightly closed. Store in a ventilated place between (+5)-(+30) °C of temperature. It should be consumed within 12 months after the production date.
There are yet no reviews for this product.
There are not yet technical information for this product.