HIGHLIGHTS

• Retains Tack for 400 Shirts or More
• Eliminates Over-Spray onto Floor, Equipment & Air
• Water-Based = More Environmentally Friendly
• Maintains a Healthier work place
• Non-Flammable
• One Gallon Replaces 4-5 Cases of Aerosol Containers = huge savings!
• Freeze/Thaw Stable

MIX

• Stir approximately 30 seconds before use

APPLY

• TextTac can be applied to pallet manually with a card, paintbrush, or spray bottle. We recommend air assisted spray units for fine, even coatings. We suggest applying pallet tape to a clean surface – this avoids scrubbing TexTac from the pallet. Only a thin layer is needed for shirt printing; however, a thicker layer is needed for fleece, sweat shirts, towels, or other high lint materials

DRY

• TexTac can be air-dried; however, 20 seconds under a flash unit will accelerate drying. A heavier coat of adhesive increases tack strength and dry times. TexTac will turn clear when dry

RETACK

• When lint build-up diminishes tack, a damp sponge can be used to knock off lint and re-tackify the adhesive, or reapply and allow TexTac to dry. Adhesive may transfer to garment if it is not dry or bonded to pallet. Retacking may not be necessary until 200 to 400 impressions

CLEAN UP

• Pallets, equipment, and floors can be cleaned with hot water mixed with image mate Degreaser 260. Pallet paper eliminates pallet cleaning. Acetone may be used on stubborn areas

TEXTAC SDS | TEXTAC TDS