Hybrid Crack White is a water based printing base used to achieve a cracking effect in textile printing. It can be used as a white or can be coloured with pigments
Technical Details :
Appearance : Paste
Odor : Charateristic
Color : White
Viscosity : [(25 °C/77˚F) sp: 7, rpm: 20 Brookfield ] : 50.000 – 60.000 [mPa.s]
Density : 1,4 g/cm³ (25 °C/77˚F)
Spesific gravity : appr. 1,15 g/cm³
pH : 7.0 - 8.5
Boiling Point : 100°C/212˚F
Solubility : Soluble in water
(Standards: for fastness tests - ISO 105-X10: 1993 / ISO 105-D01:2010 / ISO 105-B02:2013)
It has been manufactured for the products which don’t want to take foil print.
Rubbing and washing tests should be applied 24 hours after curing.
Never use water to reduce the viscosity. Before use, please stir this product well. Do not use any additives that are not advised. After using, the screen should be cleaned with the water.
It provides to print with the silk-screen that are made between 43-77 mesh.
50 – 62 Shore, U type dr. blade shoul be used with Hybrid Crack White.
It is fixed at 150 0 C temperature, 3 minutes.
SAFETY and STORAGE
It does not contain harmful substances for inhalation and skin when used. However in case of contact to sensitive organs, such as eyes or mouth wash with plenty of water. If necessary, medical assistance is advised.
Keep containers dry and tightly closed. Store in a ventilated place between (+5)-(+30) °C of temperature. It should be consumed within 12 months after the production date.
There are yet no reviews for this product.
There are not yet technical information for this product.